It is advisable to take regular backups
of your data. New VIRUS threat / System inconsistency / erroneous operations
may cause loss of data. We recommend to take back-ups in a regular interval
and store in any optical media.
Procedure
Start Menu / SONOCARE / SonoCare Backup
and Restore.
Choose the path other than the drive partition
where SONOCARE application is installed.
If SonoCare is installed in C:/ drive then
select partition other than C:/ Drive for safe process.
Copy images folder from C:/Program File/SonoCare/Images.
Paste the folder in the location where
backup database is placed.
By practicing to take backup
regularly not only protects your database from any crash or threat but
also helps you to save you from loosing your database.
IMAGE TRANSFER PROCESS FROM ULTRASOUND
EQUIPMENT
Images from the ultrasound machine can be transferred
to the computer by two procedures:
DICOM (Digital Image Communication in Medicine)
standard of transfer.
Non DICOM (Image Grabber Card) transfer.
DIGIT Technology.
DICOM TRANSFER
Most importantly DICOM transfer
takes place only from the DICOM Standard ultrasound equipment. To get
the benefit of DICOM Image transfer it is mandatory to enable DICOM Mode
in the Ultrasound Equipments. For more detail on DICOM please contact
your ultrasound equipment vendor.
NON DICOM TRANSFER
Images can also transfer through
Image Grabber Card in case of a Non DICOM ultrasound machine. Images can
be grabbed from Ultrasound machine into the computer through capture card
by means of a video cable.
NON DICOM USER (How to transfer images from NON
DICOM Machine?)
Check the output video port in your Ultrasound
machine . This port may be,
S VIDEO PORT
BNC or COMPOSITE video port
Connect CAPTURE CARD into your PC.
Connect the corresponding
video cable provided in the SonoCare software kit to the respective
port in the Ultrasound Machine.
Connect the other end of the video cable to
the Computer Capture Card in the video provision slot.
Open SonoCare application and do the following:
Go to PATIENT SEARCH.
Select a NEW PATIENT from the button bar.
Fill up the demographic detail of the patient
and SAVE it.
Close the NEW PATIENT window.
Now from the PATIENT SEARCH window select
the patient which images are going to transfer into
the computer.
Click on IMAGE CAPTURE Icon from the PATIENT
SEARCH window.
In the IMAGE CAPTURE Screen check the following
configuration.
VIDEO CONFIGURATION.
COMPRESSION: Mpeg 4 video encoder
V4.
SIZE: Maximum value available in
the drop down list.
COM PORT.
VIDEO SOURCE: Select the video source
as per the cable connection
(in case S Video select S VIDEO port
else COMPOSITE PORT).
Now start your Ultrasound Machine.
The display in the Ultrasound machine should
appear in the SONOCARE IMAGE CAPTURE screen.
Now you are READY TO GO.
F3 : CAPTURE MULTIPLE FRAME - VIDEO.
F2 : CAPTURE SINGLE FRAME - STILL IMAGES.
FOOT SWITCH
Connect the Foot Switch provided
in the SonoCare Software Kit to the COM port (9PIN) or GAME PORT (15 PIN)
in the computer. Keep the Foot Switch near the Ultrasound Machine. In
case of unavailability of COM port provision in your computer please contact
your computer vendor for the provision.
Copyright
MEDIA LOGIC SOLUTIONS Pvt. Ltd. All Rights Reserved.
The textual, graphic, audio and audiovisual material in this site is protected
by copyright law.
You may not copy, distribute, or use this material. Any trademarks are
the properties of their respective owners.
Any questions, comments, suggestions regarding website
please email us at: infocentre@medialogicindia.com
